YouTube – Dell 5210n 5210 5310n 5310 Fuser Maintenance Kit Replacement

Posted on by

YouTube – Dell 5210n 5210 5310n 5310 Fuser Maintenance Kit Replacement.
Step by step video installations instructions on how to replace your fuser and rollers.  Click the video above.
This describes the installation of the kit part number GG660, fuser HG362, pickup tires, transfer roller and double charge roller.
You can purchase the fuser, maintenance kit or roller kit here

Posted on by

What you will see

The printer is displaying a 922 type Service Fuser error (for example, 922.01, 922.54, 922.99, etc.).

Explanation

This type of error message indicates that the fuser unit inside the printer is operating below the proper temperature.

If this is the first time you have seen the error

    1. Power the printer off.
    2. Leave the printer powered off for 20 to 30 seconds.
    3. Power the printer back on. If it comes up to the Ready state, try printing again.
      • If the fuser error does not return, continue using the printer as normal but observe it closely over the next few days to see if the error returns.
      • If the fuser error returns on power-up or if the error returns as soon as you try to print or at a later date, the printer will probably require service to correct the issue.

Before arranging service

See ‘Contacting Lexmark‘ at the end of this document for information on arranging service. However, before arranging service on the printer, please carry out the following checks:

  • If this is an intermittent error, make sure the printer is plugged directly into a wall outlet and not through a surge device or power strip.  Power strips and uninterrupted power supplies can cause a low amperage problem to occur, which can trigger a false fuser error. This is true even if the printer has worked on this surge device in the past.
  • Confirm that the printer is not exposed to cold air. For example, make sure the printer is not positioned in front of an air conditioner unit or directly in the path of an air vent where cold air can blow onto it. Make sure the temperature in the operating/office environment is above 60 F (16 C).
  • If the error message is a 922.x4 error (where x can be any number), updating the printer’s engine code may correct the issue. See the directions below.

How to update the printer’s engine code (922.x4 errors only)

Step Action
1 To check the printer’s current engine code level, print out the menu settings pages. Click here for instructions.
2 Look for the header Device Information on one of the pages. Under Device Information, you will see Engine.
3

Check the printer’s current engine code level. If it says, for example, LS.ST.E204, the engine code level is 204.

  • If the engine code level is below E213 (for example, LS.ST.E209), updating the engine code to the most recent level may correct the fuser issue. Continue with step 4.
  • If the engine code level is at E213 or E213a or higher, the printer will likely require service to correct the issue. See ‘Contacting Lexmark‘ at the end of this document for more information.
4

To obtain the current engine code level, go to Lexmark’s firmware download site. When prompted for the authorization key code, enter LSSTE213A.

NOTE: The key code listed here is correct as of November 2007. If it does not work, please contact Lexmark Technical Support for the correct key code. See ‘Contacting Lexmark‘ at the end of this document.
5

When you enter the authorization key code, the computer will begin downloading the file(s).

IMPORTANT! Some files can be very large. Please allow plenty of time, possibly up to half an hour, for downloading files when using a slower Internet connection.
6 Save the file(s) to a directory or folder of your choice. IMPORTANT! Make a note of the location.
7 Once you have downloaded the file(s), unzip any .zip files to extract the necessary engine code files and instructions.
8 You will need to copy the engine code file to the printer. The method to use depends on how your computer is connected to the printer. Refer to the instructions in the downloaded files.

NOTE: If the downloaded files do not include any instructions, click the appropriate link below. If copying the engine code via:
9 Once you have updated the printer’s engine code, power the printer off for 30-60 seconds. Then power it back on and try printing again.

  • If the printer works correctly, continue using it but observe it closely over the next couple of days to see if the issue returns.
  • If updating the engine code does not clear the error or if the error occurs again at a later date, the printer will likely require service to correct the issue. See ‘Contacting Lexmark‘ below. NOTE: The parts most likely to be causing this error are the fuser unit, the system board, or the low voltage power supply unit. These parts will need to be tested by a service technician and replaced as necessary.

YouTube – Dell M5200 W5300 Fuser Maintenance Kit Replacement

Posted on by

YouTube – Dell M5200 W5300 Fuser Maintenance Kit Replacement.
There are kits for the M5200 and W5300 series printer when you need to change the fuser or rollers.
These can be installed in a few minutes and the video will walk you though it step by step.
Save on your next service call…. Do it yourself.
Here is a compatible roller kit for your Dell M5200 or W5300 printer:

Dell W5300 and M5200 Roller Kit

Dell W5300 and M5200 Roller Kit

YouTube – Replacing fuser maintenance kit on the HP LJ 4200 4250 4350 4300

Posted on by

YouTube – Replacing fuser maintenance kit on the HP LJ 4200 4250 4350 4300.
Click the link above to view the installation video.

You can order this HP fuser and maintenace kit online here
Installation instructions on how to replace the fuser, transfer roller and pick rollers on the HP 4200 4200n 4250 4250n 4350 4350n 4240 4240n 4300 laserjet printers. Order HP printers and parts at:
http://www.fastprinters.com  RM1-0037 RL1-0019 RM1-0699 RB1-8714 RM1-1110 RM1-0013 RM1-0101 Q2429A Q5421A